This is the first of its kind amp at the era that able to switch Class A / Class AB operation. The user can enjoy both amplification class A/AB by a selector switch at the front panel.
Yamaha utilised many audiophile design & components in the unit, ALPS 4-gang volume pot, DC couple interstage, SRPP Output & etc. Beefy power supply with oversized transformer & 18,000uF x2 power capacitors. All these housed in the heavy stylish wooden casing.
CA-1000 has great drive & finesse. Class AB 75W/ch, Class A 15W/ch.
All buttons & switches are all working perfectly. The wooden casing is still in excellent condition for its age.
The RCA & speaker terminals inputs at the rear panel are all very clean.
1) This is the Japan local set (100V version) made in Japan. However, the internal voltage selectable wired to 240V. So you don't need a step down transformer (save cost!!!).
2) Power input upgraded to an IEC socket so that you can utilise your own better power cord.
3) Speaker Terminal upgraded to accept Banana plug.
Power output: 70 watts per channel into 8Ω (stereo)
Frequency response: 10Hz to 50kHz
Total harmonic distortion: 0.01%
Damping factor: 70
Input sensitivity: 2.5mV (mic), 3mV (MM), 120mV (line)
Signal to noise ratio: 70dB (mic), 80dB (MM), 90dB (line)
Channel separation: 50dB (MM), 50dB (line)
Output: 120mV (line), 0.775V (Pre out)
Dimensions: 461 x 360 x 170mm
Speaker load impedance: 4Ω to 16Ω
Semiconductors: 6 x FET, 55 x transistors, 26 x diodes, 5 x zener diodes
You can follow the weblink below for manual & reviews. or please google for more information,
SMS or WhatsApp only. Billy 012-2821295, Hong 012-3000495
- New Member
- Number of posts : 13
Age : 48
Location : Dataran Prima, PJ
Registration date : 2019-09-22