Primare CD32 CD Player (SOLD)
Hi-Fi 4 Sale - Malaysia / Singapore Audio Forum & Marketplace | www.hifi4sale.net :: Audio & Video Equipment Marketplace :: Audio & Video Equipment: FOR SALE (Pre-owned & Used)
Page 1 of 1
Primare CD32 CD Player (SOLD)
CD32 CD player
The CD32 is the successor to and upgrade for the successful and acclaimed balanced CD31 CD player. Every component, from the CD transport to the audio output stage, has been designed to achieve the highest possible audio performance.
Audiophile Topology
The CD32 Compact Disc player is housed in an alloy heavy gauge steel chassis, which provides strength, rigidity, and screening, while being effective at damping vibrations from external sources.
From the CD transport we extract the AES/EBU (balanced SPDIF) signal and feed it to a superior SRC4392 sample rate converter (user switchable between 44.1kHz bypass, 48 kHz and 96 kHz), which incorporates jitter suppression capabilities to ensure that the DACs receive as clean a signal as possible according to the sampling frequency elected.
The CD32 uses two high-performance Burr-Brown PCM1704 DACs in conjunction with a DF1706 digital filter – one of the best true multi-Bit digital-to-analogue converter/digital filter combinations available. The current to voltage conversion stage is fully discrete (no Op-amps) and ends in a single-ended output stage consisting of a single MOSFET transistor driven by an active current source (preferred to passive resistors).
The CD32 contains no capacitors in the signal path: a DC-servo takes care of any DC offset present in the circuit or from the DACs.
SMD technology and separate PCB modules are used throughout the design in order to keep the signal paths isolated and as short as possible.
Transport
The CD32 uses a dedicated CD-transport incorporating a Sanyo laser and is not built around a multi-format CD/DVD-ROM interface. The Toshiba based servo circuit incorporates a five second FIFO memory in order to provide the best jitter suppression and protection from mechanical shock.
High Performance Power supply
In order to meet the latest standby power consumption standards, the CD32 incorporates a switch mode power supply for its microprocessor circuit. However all the analogue and digital audio circuits are supplied from a R-core transformer with separate windings for mechanical, analogue and digital circuits. These voltages are closely regulated by a discrete power regulation circuit comprising L-C filters and discrete components. This high performance circuit (low ripple etc.) ensures that more than enough regulated power is available to reproduce with accuracy even the deepest sonic transient capable of being recorded on a compact disc.
This power supply configuration together with carefully designed ground planes and paths, separated circuit boards and discrete current-to-voltage conversion gives the CD32 the especially clean wideband audio performance expected by audiophiles all over the world.
Display and user features
The player incorporates a white modern OLED display, which is isolated from the audio circuits by the front panel design. During play the display will auto-dim to a point where it is still readable without disturbing the listening experience. When connected to the I32 via IR, the CD32 and I32 display brightness will match.
The CD32 sample frequency can be switched between 44.1 kHz, 48 kHz and 96 kHz.
The CD32 will play MP3/WMA files over disc or USB in conjunction with comprehensive track programming abilities.
Inputs/Outputs
Inputs: USB interface; IR input 3.5mm; RS232; Trigger in/out 3.5mm
Outputs: Balanced (XLR) and unbalanced RCA analogue outputs are provided together with professional AES/EBU, SPDIF and TOS-link digital outputs. RS232C, IR as well as trigger connections are available for successful integration with home automation systems.
Product specification CD32
Mechanism Asatech 8210.B01-02, Sanyo SF-P101N D/A converter 2x PCM1704, DF1706 (digital filter), 24/96 kHz Analogue outputs Discrete analogue output stage; 1 pair RCA, 2.1 Vrms; 1 pair XLR, 4.1 Vrms; Output impedance RCA 390 Ώ; XLR 47 Ώ Digital outputs 1x SPdif (RCA); 1x AES/EBU (XLR); 1x optical (TOS-link) Frequency response 20Hz – 20 kHz -0.5dB Signal to Noise 20Hz – 20kHz unweighted -100dB THD + N 20Hz – 20kHz <0.01% Other inputs USB interface; IR input 3.5mm; RS232; Trigger in/out 3.5mm Power consumption Standby 0.5W; Idle 22W; Operation 25W Dimensions (wxdxh) 430 x 375 x 106 mm Weight 10.5 kg Colour options Black or Titanium
CONDITION : 8.5 / 10 (COMPLETE WITH ORIGINAL BOX, REMOTE CONTROL AND MANUAL)
AGED: 5-6 YEARS OLD
PRICE: sold
INTERESTED KINDLY WHATSAPP MESSAGE ONLY TO +6016 4554 333
The CD32 is the successor to and upgrade for the successful and acclaimed balanced CD31 CD player. Every component, from the CD transport to the audio output stage, has been designed to achieve the highest possible audio performance.
Audiophile Topology
The CD32 Compact Disc player is housed in an alloy heavy gauge steel chassis, which provides strength, rigidity, and screening, while being effective at damping vibrations from external sources.
From the CD transport we extract the AES/EBU (balanced SPDIF) signal and feed it to a superior SRC4392 sample rate converter (user switchable between 44.1kHz bypass, 48 kHz and 96 kHz), which incorporates jitter suppression capabilities to ensure that the DACs receive as clean a signal as possible according to the sampling frequency elected.
The CD32 uses two high-performance Burr-Brown PCM1704 DACs in conjunction with a DF1706 digital filter – one of the best true multi-Bit digital-to-analogue converter/digital filter combinations available. The current to voltage conversion stage is fully discrete (no Op-amps) and ends in a single-ended output stage consisting of a single MOSFET transistor driven by an active current source (preferred to passive resistors).
The CD32 contains no capacitors in the signal path: a DC-servo takes care of any DC offset present in the circuit or from the DACs.
SMD technology and separate PCB modules are used throughout the design in order to keep the signal paths isolated and as short as possible.
Transport
The CD32 uses a dedicated CD-transport incorporating a Sanyo laser and is not built around a multi-format CD/DVD-ROM interface. The Toshiba based servo circuit incorporates a five second FIFO memory in order to provide the best jitter suppression and protection from mechanical shock.
High Performance Power supply
In order to meet the latest standby power consumption standards, the CD32 incorporates a switch mode power supply for its microprocessor circuit. However all the analogue and digital audio circuits are supplied from a R-core transformer with separate windings for mechanical, analogue and digital circuits. These voltages are closely regulated by a discrete power regulation circuit comprising L-C filters and discrete components. This high performance circuit (low ripple etc.) ensures that more than enough regulated power is available to reproduce with accuracy even the deepest sonic transient capable of being recorded on a compact disc.
This power supply configuration together with carefully designed ground planes and paths, separated circuit boards and discrete current-to-voltage conversion gives the CD32 the especially clean wideband audio performance expected by audiophiles all over the world.
Display and user features
The player incorporates a white modern OLED display, which is isolated from the audio circuits by the front panel design. During play the display will auto-dim to a point where it is still readable without disturbing the listening experience. When connected to the I32 via IR, the CD32 and I32 display brightness will match.
The CD32 sample frequency can be switched between 44.1 kHz, 48 kHz and 96 kHz.
The CD32 will play MP3/WMA files over disc or USB in conjunction with comprehensive track programming abilities.
Inputs/Outputs
Inputs: USB interface; IR input 3.5mm; RS232; Trigger in/out 3.5mm
Outputs: Balanced (XLR) and unbalanced RCA analogue outputs are provided together with professional AES/EBU, SPDIF and TOS-link digital outputs. RS232C, IR as well as trigger connections are available for successful integration with home automation systems.
Product specification CD32
Mechanism Asatech 8210.B01-02, Sanyo SF-P101N D/A converter 2x PCM1704, DF1706 (digital filter), 24/96 kHz Analogue outputs Discrete analogue output stage; 1 pair RCA, 2.1 Vrms; 1 pair XLR, 4.1 Vrms; Output impedance RCA 390 Ώ; XLR 47 Ώ Digital outputs 1x SPdif (RCA); 1x AES/EBU (XLR); 1x optical (TOS-link) Frequency response 20Hz – 20 kHz -0.5dB Signal to Noise 20Hz – 20kHz unweighted -100dB THD + N 20Hz – 20kHz <0.01% Other inputs USB interface; IR input 3.5mm; RS232; Trigger in/out 3.5mm Power consumption Standby 0.5W; Idle 22W; Operation 25W Dimensions (wxdxh) 430 x 375 x 106 mm Weight 10.5 kg Colour options Black or Titanium
CONDITION : 8.5 / 10 (COMPLETE WITH ORIGINAL BOX, REMOTE CONTROL AND MANUAL)
AGED: 5-6 YEARS OLD
PRICE: sold
INTERESTED KINDLY WHATSAPP MESSAGE ONLY TO +6016 4554 333
Last edited by useditem123 on Mon Apr 01, 2019 8:52 am; edited 1 time in total (Reason for editing : sold)
useditem123- Dealer\Reseller\Trader\Service Provider
- Number of posts : 1661
Age : 39
Location : Pulau Pinang
Registration date : 2016-02-25
Similar topics
» Primare cd32 cd player (Sold)
» Primare CD32 CD Player (PL)
» Primare D30.2 cd player (SOLD)
» Primare V25 CD/DVD Player (Sold)
» Primare D20 CD Player (Used)SOLD
» Primare CD32 CD Player (PL)
» Primare D30.2 cd player (SOLD)
» Primare V25 CD/DVD Player (Sold)
» Primare D20 CD Player (Used)SOLD
Hi-Fi 4 Sale - Malaysia / Singapore Audio Forum & Marketplace | www.hifi4sale.net :: Audio & Video Equipment Marketplace :: Audio & Video Equipment: FOR SALE (Pre-owned & Used)
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum