Dynavector DV20X2 L (SOLD)

Selling beloved Dynavector DV 20X2L low output MC cart  SOLD



Tel: +60122738893

DV-20X has a solid aluminum alloy body and a rigid magnet construction similar to XX-2MKII. The cantilever is a 6mm length of hard aluminum pipe with a Micro-Ridge stylus. The magnetic flux damping and softened magnetism along with powerful neodymium magnets gives the 20X2H a healthy 2.8 mV output - suitable for most MM inputs. The 20X2L has an output of 0.3 mV ideal for most MC phono stages.
Both high and low versions of their 20X2 are available ensure for the optimum end result. The high output model is well suited to valve preamplifiers or electronics that only offer MM inputs whilst the low output version offers superb performance when combined with dedicated moving coil inputs.

[size=12][b]Type[/b][/size]	[size=12]High/Low output moving coil cartridge with flux damper and softened magnetism[/size]
[size=12][b]Output Voltage[/b][/size]	[size=12]2.8mV / 0.3mV (at 1KHz, 5cm/sec.)[/size]
[size=12][b]Channel Separation[/b][/size]	[size=12]25 dB (at 1KHz)[/size]
[size=12][b]Channel balance[/b][/size]	[size=12]1.0 dB (at 1KHz)[/size]
[size=12][b]Frequency response[/b][/size]	[size=12]20 - 20,000Hz (± 1dB)[/size]
[size=12][b]Compliance[/b][/size]	[size=12]12 mm/N[/size]
[size=12][b]Tracking force[/b][/size]	[size=12]1.8 - 2.2 g[/size]
[size=12][b]Impedance[/b][/size]	[size=12]150 ohms / 5 ohms[/size]
[size=12][b]Recommended load impedance[/b][/size]	[size=12]> 1,000 ohms / > 30 ohms[/size]
[size=12][b]Cantilever[/b][/size]	[size=12]6mm length, hard aluminium pipe[/size]
[size=12][b]Stylus tip[/b][/size]	[size=12]Micro Ridge Nude diamond[/size]
[size=12][b]Weight[/b][/size]	[size=12]9.2 g[/size]

Bump

bump

bump

bump

bump

bump

bump

bump

bump

Bump

bump

bump

Bump