NAD Pre-Amplifier (sold)

NAD 116 stereo preamplifier in Good Working condition.

This was one of NAD’s top of the line preamplifiers.

This very versatile preamp features inputs for both moving coil and moving magnet cartridges.

It has 6 line level inputs, and 2 tape outputs.

It has two preamp outputs on RCA and one set of balanced outs on XLR connects.

This even has an excellent headphone output on the front panel.

This is a classic NAD design ( MiniMalist) without any unnecessary features. The front panel has only input switching a volume control and a balance control


• 6 line inputs incl. 2 Tape in/outputs with dubbing facility
• Input switching through relays with Gold Plated contacts
• Switchable MM and MC phono input
• Balanced XLR outputs; 2 sets RCA line outputs
• Gold plated input and output input sockets
• Independent headphone amplifier
• NAD Link



SPECIFICATIONS - NAD 116
Measured in accordance with EIA Standard RS-490 (IHF T-202)
Phono input
Input impedance (R and C) MM 47k + 200pF
MC 100 + 50pF
Input sensitivity ref. 0.5V 1KHz MM 1.5mV
MC 1mV
Input overload 20Hz/1KHz/20KHz MM 20mV/200mV/1700mV
MC 1.3mV/13mV/110mV
Signal to noise ratio (A-weighted with cartridge connected) MM 76dB ref. 5mV
MC 76dB ref. 0.5mV
RIAA accuracy MM ±0.2dB 20Hz - 20KHz
MC ±0.2dB 50Hz - 20KHz
-0.5dB at 20Hz
Line level inputs (CD, Video, Aux, Tuner, Tape1, Tape2)
Impedance (R+C) 20K + 450pF
Sensitivity ref. 0.5V 80mV
Maximum input signal >10V
Signal to noise A-weighted 98dB ref. 0.5V
Frequency response (20 - 20kHz in tone defeat mode) ±0.2dB
THD 0.01%
Line level outputs
Output impedance Pre-amp 100
Tape Source Z + 2K
Phones 120
Maximum output level Pre-amp >12V
Tape >10V
Phones >8V into 600
>250mV into 8
Physical specifications
Dimensions (W x D x H) 435 x 320 x 80mm
Weight 4.2Kg


Internet Pic Info for Reference :
NAD-S100 Silverline Pre-Amplifier


Note : Come with Compatible Fully Working Remote Control

up

Up