Anthem Statement P2 2CH PowerAmp (Used) SOLD

Anthem Statement P2

2-channel power amplifier with 325 watts per channel continuous power into 8 ohms

Anthem Statement P2 Features

• multi-layered, hand-designed circuit boards with thick copper traces
  
  
• rugged, independent power supplies with tuned toroidal power transformers for each amplifier channel
  
  
• fourteen rugged bipolar output devices per channel
  
  
• custom-designed convection-cooled heatsinks with serrated fins;
  
  
• a “no-fuse” design strategy
  
  
• 2 channel amplifier
  
  
• 325w x 2 @ 8 ohms
  
  
• XLR and RCA inputs
  
  
• Each amplifier is mono design with separate power supply and transformer
  
  
• 2 ohm capable
  
  
• THD 0.0007%
  
  
• 14 bipolar output devices per channel
  
  
• No fuse design
  
  
• 3 on/off modes – auto/manual / trigger
  

  General

  
  
  
  
  
  
  
  • Inputs 2 Single-Ended, 2 Balanced, 1 Relay Trigger (3.5 mm Mono Jack)
    
  • Outputs 2 Pairs Speaker Binding Posts, 1 Relay Trigger (3.5 mm Mono Jack)
    
  
  Switches
  
  
  
  • Front Panel Power (On/Off)
    
  • Rear Panel On/Off Modes (Trigger, Manual, Auto), Inputs (RCA, XLR, XLR -6dB)
    
  
  Power Output
  
  
  
  • Continuous RMS, 20 Hz – 20 kHz, <1.0% THD
    
  • 8 Ohms: 1 = 325W, All = 325W (# of Channels Driven)
    
  • 4 Ohms: 1 = 500W, All = 500W (# of Channels Driven)
    
  • 2 Ohms: 1 = 675W, All = 675W (# of Channels Driven)
    
  
  
  

  Specifications

  
  
  
  
  
  
  
  • Power Bandwidth: 10 Hz to 150 kHz (+0 -3 dB, 325 W into 8ohms)
    
  • Frequency Response: 20 Hz – 20 kHz (+0 -0.15 dB); 5 Hz – 100 kHz (+0 -2 dB)
    
  • THD + N (225 W into 8ohms): 0.0007% at 1 kHz, 0.008% at 20 kHz
    
  • IMD: 0.00019% (CCIF, 325 W into 8ohms)
    
  • INPUT SENSITIVITY (RCA and XLR 0 dB inputs): 1 Vrms in for 28.3 Vrms out (100 W into 8ohms)
    
  • Input Impedance: 18 k Ohms (RCA); 22 k Ohms (XLR)
    
  • Damping Factor: >600 at 20 Hz, 400 at 1 kHz (ref. 8ohms)
    
  • S/N Ratio: 125 dB, A-weighted (ref. 325 W)
    
  • Crosstalk (between any two channels): -140 dB (20 Hz), -80 dB (20 kHz)
    
  • Voltage Gain: 29 db
    
  • Slew Rate: 40 v/µs
    
  • Power Requirement: 105 to 130 V, 60 Hz ; 2 x 1800 W Power consumption
    
  • Dimensions (H x W x D; heights include feet, depth including handles): 23.8 cm x 49 cm x 57.2 cm
    
  • Net Weight : 34 kg
    
  
   
  
• https://www.anthemav.com/products-current/collection=statement/model=p2/page=overview
  

• Conditions: 9/10 (USED)
  Price: SOLD inclusive postage to West Malaysia
  Postage Method: Citylink Courier or Poslaju
  Whatsapp: Choy 012-5685484