NAD C375BEE Integrated amp (Used) sold

Key Features

• 150W x 2 Continuous Power into 4 Ohms and 8 Ohms
  
• 250W, 410W, 600W IHF Dynamic power into 8, 4 and 2 Ohms, respectively
  
• PowerDriveTM circuit
  
• NAD SR-8 Full System Remote Control
  
• Headphone socket
  
• Front panel Media Player (MP) input for attaching portable MP3 Player
  
• Relay Input Switching
  
• Holmgren Toroidal Power transformer
  
• 7 Line inputs, including two tape in/outs
  
• All discrete circuitry
  
• Class A Voltage Stages (Preamp and Power Amp)
  
• Distortion Canceling Circuit
  
• BEE Anti-saturation Clamp
  
• Short signal path from input to output
  
• All sockets Gold plated
  
• Tone controls defeat switch
  
• Main-amp input & 2 pre-amp outputs
  
• Speaker A + B outputs and switching
  
• Soft ClippingTM
  
• IR Input/Output
  
• 12V trigger out
  
• RS-232 serial port
  
• Detachable IEC Power Cable
  
• Optional PP375 MC/MM Phono Module
  
• <1W Standby Power Consumption
  
• Free of lead and other environmentally dangerous substances
  

Preamplifier

Line Level Input, Pre Out

• THD CCIF IMD, DIM 100)
  
• <0.004% at 2V out (ref. 20Hz – 20kHz)
  
• Signal/Noise ratio IHF
  
• >102dB (IHF; A-weighted, ref. 500mV)
  
  
• >110dB (A-weighted, ref. 2V out, Volume maximum)
  
  
• >92dB (ref. 100mV out, unity gain)
  
• Channel separation
  
  
• 1kHz
  
• >80dB
  
• 10kHz
  
• >70dB
  
• Input impedance (R and C)
  
• 100 kilohm+ 320pF
  
• Maximum input signal
  
• >8Vrms (ref. 0.1% THD)
  
• Output impedance
  
  
• Pre-out
  
• 75 Ohm
  
• Variable out
  
• <325 Ohms
  
• Tape out
  
• Source Z + 1 kilohm
  
• Input sensitivity
  
• 158mV (ref. 500mV out)
  
• Frequency response
  
• ±0.1dB (ref. 20Hz – 20kHz, Tone defeat ON)
  
  
• ±0.5dB (ref. 20Hz – 20kHz, Tone defeat OFF)
  
• Maximum voltage output
  
  
• IHF load
  
• >10V (ref. 0.03% THD)
  
• 600 Ohm load
  
• >10V (ref. 0.03% THD)
  

Tone Controls

• Treble
  
• ±5dB at 10kHz
  
• Bass
  
• ±8dB at 100Hz
  

Power Amplifier

Main In, Speaker Out

• Continuous output power into 8 Ohm and 4 Ohm (Stereo)
  
• >150W (ref. rated THD, 20Hz-20kHz, both channels driven)
  
• Continuous output power into 8 Ohm (Mono, Bridge mode)
  
• >330W
  
• Rated THD (CCIF IMD, DIM 100)
  
• <0.009% (ref. 20Hz – 20kHz)
  
• Clipping power
  
• >170W (ref. 1kHz 0.1% THD)
  
• IHF dynamic power
  
  
• 8 Ohm
  
• 250W
  
• 4 Ohm
  
• 410W
  
• 2 Ohm
  
• 600W
  
• IHF dynamic power (Bridge mode)
  
  
• 8 Ohm
  
• 800W
  
• 4 Ohm
  
• 1200W
  
• Peak output current
  
• >50A (ref. 1 Ohm, 1ms)
  
• Signal/noise ratio
  
• >102dB (A-weighted, ref. 1W)
  
  
• >123dB (A-weighted, ref. 150W)
  
• Damping factor
  
• >200 (ref. 8 Ohms, 50Hz and 1kHz)
  
• Frequency response
  
• ±0.1dB (ref. 20Hz – 20kHz)
  
  
• 3Hz – 70kHz (ref. -3dB)
  
• Input impedance
  
• 10 kilohm + 200pF
  
• Input sensitivity
  
• 1.2V (for 150W in 8 Ohms)
  
• Voltage gain
  
• 29dB
  
• Headphone output impedance
  
• 68 Ohms
  
• Channel separation
  
  
• 1kHz
  
• >85dB
  
• 10kHz
  
• >75dB
  

Trigger Out

• Output resistance
  
• 120 Ohms
  
• Output current
  
• 50mA
  
• Output voltage
  
• +12V ±10%
  

Weight & Dimensions

• Net
  
• 435 x 133 x 352mm
  
  
• 17 1/8 x 5 1/4 x 13 7/8″
  
• Gross*
  
• 435 x 150 x 396mm
  
  
• 17 1/8 x 5 15/16 x 15 5/8″
  
• Net weight
  
• 15.3kg (33.7lb)
  
• Shipping weight
  
• 18.0kg (39.7lb)
  
  
  
• Asking SOLD